mount monitor without vesa
Monitor, Monitor Guides

How To Mount A Monitor Without Vesa – User’s Guide

Nothing is more annoying than setting up a new monitor and discovering that your computer lacks the appropriate connection type to connect it. 

It’s a typical issue because many computers lack the proper interface to connect VESA stands, which are used by most new displays.

Don’t stress if you don’t know how to mount a monitor without a VESA mount. Step-by-step instructions are included in this article to help you get started. 

Check your owner’s handbook to see whether your monitor has additional mounting requirements before getting started. With a little patience and a few necessary equipment, you’ll come to know how to mount a computer monitor without VESA.

Why To Mount A Desktop Monitor Without A Vesa:

To make room on the desk:

It is more convenient to work when your monitor is mounted to a wall or a stand, which frees up desk space.

To make ergonomics better:

You may place your monitor at the ideal position and height for your needs when it is properly mounted. Neck and eye strain can be minimized by it. The use of visually impaired monitors further reduces and prevents eye strain.

To set up triple monitors:

You must mount three monitors if you wish to operate them side by side and want to have a triple monitor setup.

To keep your monitor safe:

Your monitor is less likely to be broken or pushed over when it is placed properly.

 To increase productivity:

You can work more effectively if your monitor is positioned correctly.

Things you’ll need:

 Following are the tools you will need to mount a monitor without a Vesa.

  • A screwdriver
  • A monitor
  • A hacksaw
  • Screws that match your monitor
  • A hammer
  • A drill (optional)

 Method 1 – How To Mount A Computer Monitor Without Vesa

Step 1: Locate the wall studs 

mount monitor without vesa

You may begin attaching the monitor as soon as you have all the necessary equipment and materials.

The first thing you’re gonna do is to locate the studs in your wall. It is vital because to secure the mount properly, you will need to screw it into the studs.

You may locate the studs in the wall by tapping about with a screwdriver or a hammer on the surface. You’ll hear a different sound if you hit a stud instead of the drywall.

Step 2: Drill the holes

After you have located the studs, it is time to drill holes in preparation for mounting the item. It is important to consult the instructions because they will change based on the Mount you use. Drilling two holes for every mount you use is the most common method.

Step 3: Attach the mount to the wall

After you have drilled the holes, it is time to attach the mount to the wall using the appropriate hardware. You can do it with either nails or screws, depending on the amount that you have. Once more, ensure that you verify the directions with your specific mount.

Step 4:  Attach the monitor to the mount 

mount monitor without vesa

The final step is to mount the monitor and then suspend it from the mount. Depending on your amount, you can either screw the monitor into the mount or clip it into the mount to accomplish this. 

After the monitor has been properly installed, you can power it on and make any necessary adjustments.

Method 2- How To Mount A Non-Vesa Monitor Without Drilling

mount monitor without vesa

Are you wondering how to wall mount a monitor without VESA holes? Follow the steps given below to get your monitor mounted easily.

Step 1: Locate the Necessary Equipment

Make sure you have all the necessary tools before beginning the mounting process. You are going to need a wrench, a screwdriver, and a VESA adapter kit that is appropriate for your device. After you have obtained these three tools, you can proceed to the next step.

Step 2: Remove base stand:

how to share Google task

You must detach the monitor’s base support. While doing that, watch out that you don’t scratch or damage it. 

Because the screws for some base stands are located inside the monitor, there is a greater possibility of causing damage to the device if you are not careful.

Step 3: Attach the VESA Adapter to the Mount

Your monitor that is not VESA-compliant will be able to be mounted with the help of the VESA adaptor. Place the clamps that are adjustable in the plates that are fixed.

Now insert the adapter screws into the VESA holes of the mount. To accommodate your monitor’s measurements, you’ll need to adjust the length of both plates ( top and bottom).

Step #4: Mount Your Monitor

Finally, attach your monitor with the VESA mount, and now you have done.

If you’re wondering how to mount a dell monitor without Vesa, then don’t worry. Just follow the steps discussed above.

Which Mount Should You Choose?

Since you’re familiar with the differences between the VESA mount and the non-VESA mount, you may be curious as to which type of mount will be suitable for your needs.

The following are some considerations to make:

Size of Monitor:

If you have a large monitor, a VESA mount will most likely be your best option for mounting it. This is because non-VESA mounts, in general, do not offer as much adjustment as VESA mounts do. 

If you don’t know the size of your monitor, you can easily measure the monitor size by yourself and then choose a mount.

Weight Of Monitor:

If you have a monitor that is on the heavier side, you will want to make sure that the mount you choose can hold the weight of your monitor. VESA mounts are often constructed to be quite robust to hold heavier monitors successfully.

When choosing a mount, you should remember that non-VESA mounts might not be able to hold as much weight as VESA mounts can.

DIY Skills:

A mount that is not VESA-compliant could be a nice choice if you are comfortable working on do-it-yourself projects. This is because their installation can be more difficult than that of VESA mounts.

Kind of Mount That Is Used:

Mounts can either be fixed in place or adjusted to suit individual needs. A VESA mount is the greatest choice to make if you need a mount that has a lot of adjusting capabilities and you want more versatility in terms of the amount you use. 

A mount not compatible with VESA may be more suitable for your needs if you do not require as much adjustment.

If you want to utilize a mount that is not compatible with VESA with a monitor that is compatible with VESA, you will need an adapter kit.

 Budget:

If you’re short of budget, you should consider using a mount that is not VESA-compliant. VESA mounts tend to be more expensive than these types of mounting.

Pros of Non-VESA Mount:Cons of Non-VESA Mount:
The cost of these mounts is often lower than that of VESA mounts.Non-VESA mounts cannot hold as much weight as VESA mounts can.

Final Verdict:

Even though we’ve shown you how to VESA mount a monitor without a VESA mount, it’s important to remember that there are alternative options. Before beginning the installation process, research other monitors and wall mounts that may suit your setup. 

You should now be prepared to attach your monitor without using the VESA standard, and we hope this information will be helpful.